How to Use the File Eno On BB5

Is Firmware Eno:

Eno firmware that handles all the basic functions on the device. It is necessary for flashing into the memory device when the Combo Changed who due to some errors such as downgrade, flash with wrong firmware, Process Erase or Blank White screen.

After Eno Firmware flash with your cell phone will be normal and then flash again with the correct firmware, select a product code according to your choice and press the Flash button.
 
example:
- Normalize_susd_eno_sharaku_urel.fpsx (1kb size) place on the MCU
- Rm313_ENO_x_2008wk06updv0.030.fpsx (rather large size) put on PPM


How to use:

- Install File Flash who are ENO_engine_software
- Ensure that the device is attached
- Open HWK, JAF or MX-key
- Switch to Tab BB5
- Select Manual Flash and USE INI
- Select this model
- Locate and select the "xxxxx Eno" Product Codes
- Press the Flash, Flash Software must start the procedure. . .
- When finished later managed to Full Flash with one product code you want and be OK.

When needed?

the need to wear his regular Eno:
- Phone terdowngrade
- Change of nand flash
- Nand flash is corrupt